Tisha is finally complete! (HUGE POST)
March 11, 2011
So after about 6 months of researching parts, placing online orders, waiting for them to come in, and partial assembly. It is finally over.
She is up and running and shooting like a dream.
Here is a rundown of everything that went into her with links to where I got them (when available) if you feel like building your own.
Ardel Engineering lower receiver
Purchased from the Moorhead, MN branch of OutdoorBunker
DPMS lower parts kit
Purchased from the Moorhead, MN branch of OutdoorBunker
RedXArms 20″ SS Bull Barrel 1/9″ twist .223/5.56
http://shop.redxarms.com/20-STAINLESS-STEEL-BULL-BARREL-3276.htm
RedXArms keyhole marked complete upper receiver.
http://shop.redxarms.com/AR15-COMPLETE-A3-UPPER-RECEIVER-AR15-COMPLETE-A3-UPPER-RECEIVER.htm
RedXArms rifle length gas tube
http://shop.redxarms.com/AR15-RIFLE-LENGTH-GAS-TUBE-AND-PIN-AR15-RIFLE-LENGTH-GAS-TUBE-PIN.htm
FailZero EXO coated bolt carrier group
http://www.outdoorbunker.com/Fail-Zero-AR-15-Bolt-Kit-and-Hammer-p/(rsr-fz009-fzar15-01-).htm
RedXArms charging handle
http://shop.redxarms.com/AR15-CHARGING-HANDLE-AR15-CHARGING-HANDLE.htm
AIM Sports tactical big latch
Purchased from the Moorhead, MN branch of OutdoorBunker
Brownells .936 low-profile gas block
http://www.brownells.com/.aspx/pid=27015/Product/AR_15_M16_LOW_PROFILE_GAS_BLOCK
Brownells A2 rifle buffer, spring, and tube
http://www.brownells.com/.aspx/pid=27315/Product/AR_15_M16_STOCK_COMPLETION_KITS
Magpul MIAD pistol grip
http://www.outdoorbunker.com/MAGPUL-MIAD-AR15-M16-Grip-Full-Kit-Black-p/(mgt-mag052).htm
Mako SSR25 adjustable sniper stock
http://www.outdoorbunker.com/Mako-Group-Sniper-Stock-for-M16-SR25-p/(mak-ssr25-).htm
ATI 15″ free float 8 sided handguard w/ barrel nut, 15″ modular rail, sling swivel kit, & FS8 nosecone
https://www.outdoorbunker.com/SearchResults.asp?Search=ATI-A.5.10.
NcStar full size precision grade bipod
http://www.outdoorbunker.com/NcStar-Precision-Grade-Full-Size-Bipod-p/(ncs-abpgf-).htm
AIM Sports one piece scope mount
Purchased from the Moorhead, MN branch of OutdoorBunker
NcStar Patriot Series 4-16×42 Mil-Dot rifle scope
As soon as the weather gets warm I will be posting a video review of each part as well as the rifle as a whole. I will do my best to be objective as possible.
Also I feel obligated to mention that RedXArms prices scared the crap out of me before I called them up and spoke with Neil (why so cheap?!).
He seems to know what hes doing and the parts I got are top notch. Shipping took longer than expected but after I got them they exceeded my expectations.
Feel free to sound off if you have a specific questions about any of the parts or assembly.
The AR-15 Project nearly complete.
February 28, 2011
So for the last six months or so I have been assembling an AR-15 from parts. What it would end up looking like existed only in my imagination. Until last Friday that is…
With the new ATI free-floating hanguard installed, the only thing left is the bolt carrier group. I’m at a crossraods between a chrome-plated or nitrided BCG.
Believe me you will be seeing much more of “Tisha” in the future.
Adding stippling to a polymer grip or accessory.
February 16, 2011
A friend of mine taught me this and I figured I would share it with you. I have done this to my 1911 grips and let me tell you it completely changes the feel of the grip in your hand.
Also it is a good way to turn cheap plastic grips into custom textured grips.
Here is a quick tutorial:
It isnt very hard to do but keep in mind that if you aren’t comfortable taking a soldering iron to your Glock, it might be best to take it to a professional. This is something that can’t be undone.
EDIT: For some reason, UMG will not allow this video to be played as an embedded video. It will play for you on YouTube after the jump. (I think because it has a Guns ‘n Roses song in it.)
Drefizzle starts a blog!
February 4, 2011
Here it is! very exciting indeed!